Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Instrument Cluster Diagnostic System Check? | -- | Go to Step 2 | |
2 | Run the engine at idle speed. Does the volt gauge indicate a normal charging condition? | 10.5 to 16.2V | Go to Step 3
| Go to Diagnostic System Check - Engine Electrical in Engine Electrical |
3 | Visually inspect the fuel gauge. Does the fuel gauge indicate a low fuel condition? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls 3.8L | Go to Step 4 |
4 | Visually inspect the coolant temperature gauge. Does the coolant temperature gauge indicate that the engine coolant is within the normal operating range? | 88°C (190°F) to 104°C (220°F) | Go to Step 5 | Go to Diagnostic System Check in Engine Cooling |
5 | Visually inspect the oil pressure gauge. Does the oil pressure gauge indicate a low oil pressure condition? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls 3.8L | Go to Step 6 |
6 | Replace the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
