Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Audible Warnings Operation and perform the necessary inspections? | -- | Go to Symptoms | |
2 |
Does the scan tool indicate that the Key In Ignition parameter is Yes? | -- | Go to Diagnostic System Check - Radio/Audio System in Entertainment | |
3 |
Does the key-in-ignition chime sound when the left front door is opened? | -- | ||
4 | Test the key-in-ignition signal circuit for a short to voltage, a high resistance, or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
5 | Test the key-in-ignition ground circuit for a short to voltage, a high resistance, or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
6 | Inspect for poor connections at the ignition switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
7 | Inspect for poor connections at the IPM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
8 | Replace the ignition switch. Refer to Ignition and Start Switch Replacement . Did you complete the replacement? | -- | -- | |
9 | Replace the IPM. Refer to Instrument Panel Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
