Rear Compartment Lid Latch Replacement Without interior lid release handle

1. Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .



2. Disconnect the electrical connector from the lid latch assembly.
3. Disconnect the latch cable from the lock cylinder.
4. Remove the fasteners securing the lid latch assembly.
5. Remove the lid latch assembly.

1. Install the lid latch assembly.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fasteners in order to secure the lid latch assembly.

Tighten
Tighten the fasteners 10.5 N·m (93 lb in).

3. Install the latch cable to the lock cylinder.
4. Connect the electrical connector to the lid latch assembly.
5. Install the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .