- Slide the windshield wiper
and washer switch assembly into the signal switch housing so that the locking
tabs snap into place.
- Connect the windshield wiper and washer switch assembly connector.
Caution: Improper routing of the wire harness assembly may damage the inflatable
restraint steering wheel module coil. This may result in a malfunction of
the coil, which may cause personal injury.
- Install the wire harness straps.
- Install the wire harness assembly into the wire restraint clip (1).
- Install the upper and lower trim covers. Refer to
Steering Column Trim Covers - Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.