GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Bonneville 🢒 Restraints 🢒 SIR 🢒 Front Floor Console Replacement

Removal Procedure

    Object Number: 450393 Size: SH
  1. Remove the instrument panel (IP) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Remove the console tray insert. Refer to Console Tray Insert Replacement .
  3. Remove the console trim plate. Refer to Console Trim Plate Replacement .

    4. Object Number: 450392 Size: SH
  4. Disconnect the shifter cable (1).
  5. Disconnect the shift lock cable (2).

    6. Object Number: 450390 Size: SH
  6. Remove the console main wiring harness connector.

    7. Object Number: 450396 Size: SH
  7. Remove the fasteners from the console to the IP.

    8. Object Number: 450394 Size: SH
  8. Remove the fasteners from the console to the floor.
  9. Slide the console rearward and up in order to remove from the vehicle.

Installation Procedure
  1. Install the console into the vehicle by sliding forward and fitting up to the instrument panel (IP).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 450394 Size: SH
  2. Install the fasteners from the console to the floor.

    3. Tighten
    Tighten the fasteners to 9 N·m (80 lb in).


    Object Number: 450396 Size: SH
  3. Install the fasteners from the console to the IP.

    4. Tighten
    Tighten the fasteners to 6 N·m (53 lb in).


    Object Number: 450390 Size: SH
  4. Connect the main wiring harness connector.

    5. Object Number: 450392 Size: SH
  5. Connect the shift lock cable (2).
  6. Connect the shifter cable (1).
  7. Install the console trim plate. Refer to Console Trim Plate Replacement .

    8. Object Number: 450393 Size: SH
  8. Install the console tray insert. Refer to Console Tray Insert Replacement .
  9. Install the IP cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .