Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | -- | Go to Step 2 | |||||
2 |
Do the windshield wipers stop for approximately 6 seconds and then operate for approximately 24 seconds repeatedly? | -- | Go to Step 5 | Go to Step 3 | ||||
3 |
Do the windshield wipers park properly? | -- | Go to Step 6 | Go to Step 4 | ||||
4 | Test the following circuits for a short to voltage:
Did you find and correct the condition? | 10.5-15 V | Go to Step 9 | Go to Step 5 | ||||
5 | Inspect for a poor connection at the windshield wiper motor connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 7 | ||||
6 | Inspect for a poor connection at the windshield wiper/washer switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 9 | Go to Step 8 | ||||
7 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the replacement? | -- | Go to Step 9 | -- | ||||
8 | Replace the wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | Go to Step 9 | -- | ||||
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
