Remote Compact Disc Player Replacement for Pontiac Bonneville 2001

1. Open the rear compartment.
2. Remove the right side rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.



3. Remove the fasteners from the CD mounting bracket to the rear compartment.
4. Disconnect the electrical connector from the rear compartment CD player.



5. Remove the CD player to mounting bracket fasteners.

1. Install the CD player into the mounting bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the fasteners.

Tighten
Tighten the fasteners to 2 N·m (18 lb in).




3. Install the CD player and bracket into the rear compartment.
4. Connect the electrical connectors.
5. Install the fasteners to the rear compartment C/D player.

Tighten
Tighten the rear compartment CD player fasteners to 9 N·m (80 lb in).

6. Install the rear compartment trim. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
7. Close the rear compartment.