GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Bonneville 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Storage Compartment Replacement

Removal Procedure
  1. Open the instrument panel storage compartment door.

    2. Object Number: 522080 Size: SH
  2. Remove the fasteners that secure the storage compartment to the instrument panel, including the check strap.
  3. Disconnect the electrical connector for the rear compartment release switch.
  4. Remove the storage compartment from the instrument panel by pulling toward the rear of the vehicle.

Installation Procedure

    Object Number: 522080 Size: SH
  1. Connect the electrical connector for the rear compartment release switch.
  2. Install the storage compartment to the instrument panel by sliding in toward the front of the vehicle.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the storage compartment fasteners to the instrument panel.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Close the instrument panel storage compartment door.