For time and/or mileage intervals of scheduled maintenance items, refer to Maintenance Schedule .

The following text and illustrations describe the details of the required scheduled maintenance services.

For information on the proper fluids and lubricants to use, refer to Fluid and Lubricant Recommendations .

For the engine oil and filter changing procedure, refer to Engine Oil and Oil Filter Replacement in Engine Mechanical.

Engine oil viscosity, thickness, has an effect on fuel economy and the cold-weather operation, engine starting and oil flow. Lower viscosity engine oils can provide better fuel economy and cold-weather performance. However, higher temperature weather conditions require higher viscosity engine oils for satisfactory lubrication.

SAE 10W-30 is best for your vehicle. However, use 5W-30 if the outside temperature is higher than 18°C (0°F). Do not use other viscosity oils, such as SAE 20W-50.

Notice: Using oils of any viscosity other than those recommended could result in engine damage. When choosing an oil, consider the range of temperatures the vehicle will be operated in before the next oil change. Then, select the recommended oil viscosity.

Important: If your vehicle is operated in an area where the temperature falls below -29°C (-20°F), consider using a SAE 5W-30 synthetic oil or a SAE 10W-30. Both will provide easier cold starting and better protection for the engine at extremely low temperatures.

Check the tires for abnormal wear or damage. Rotate the tires to equalize the wear and obtain maximum tire life.

Inspect the accessory drive belts for the following:

Replace accessory drive belt as needed. Belts can have many small cracks in individual ribs without affecting the performance.

Change both the fluid and the filter according to the maintenance schedule intervals.

For time and/or mileage intervals of scheduled maintenance items, refer to Maintenance Schedule .

For information on the proper fluids and lubricants to use, refer to Fluid and Lubricant Recommendations .

Replace the spark plugs according to the maintenance schedule intervals.

For time and/or mileage intervals of scheduled maintenance items, refer to Maintenance Schedule .

Clean the spark plug wires and inspect for burns, cracks or other damage. Check the wire boot fit at the coils and at the spark plugs.

Replace the air cleaner filter according to the maintenance schedule intervals with the correct type. For maintenance schedule information, refer to Maintenance Schedule .