GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2003 🢒 Bonneville 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Rear Integration Body Control Module Replacement

Removal Procedure
  1. Before replacing the RIM, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration .
  2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  3. Remove the rear seat belt buckle anchor bolts.
  4. Remove the rear seat back. Refer to Rear Seat Back Replacement .
  5. Move the rear seat back insulator to the side.

    6. Object Number: 492570 Size: SH
  6. Remove the push pin retainers (1).
  7. Disconnect the electrical connectors (3).
  8. Remove the Rear Integration Module (RIM) (2) from the vehicle.

Installation Procedure

    Object Number: 492570 Size: SH
  1. Install the RIM to the vehicle.
  2. Connect the electrical connectors (3).
  3. Fasten the RIM (2) to the vehicle with the push pin retainers (1).
  4. Reposition the rear seat back insulator.
  5. Install the rear seat back. Refer to Rear Seat Back Replacement .
  6. Install the rear seat belt buckle anchor bolts.
  7. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  8. Reprogram the RIM. Refer to Body Control Module (BCM) Programming/RPO Configuration .