If you have the systems monitor, it gives you important safety and maintenance
facts about your vehicle.
When you turn the ignition on, the systems monitor and warning lights will briefly
light up. If a problem is detected, the warning lights will turn on and a chime will
sound.
The following warning lights are displayed in the systems monitor:
| • | CHECK OIL LEVEL: This message could mean
your oil level is low. If it comes on for more than five seconds, see
Check Oil Level Light
. |
| • | WASHER FLUID: This message means your washer
fluid tank is less than about 30 percent full. If this light comes on, see
Low Washer Fluid Warning Light
. |
| • | DOOR AJAR: This message means that either
the driver's door or one of the passenger's doors is not completely closed. If this
light comes on, see
Door Ajar Light
. |
| • | CHECK GAGES: This means one or more of your
gages may be in their respective warning bands. If this light comes on, see
Check Gages Warning Light
. |
| • | TRUNK AJAR: This message means your trunk
is not completely closed. |
The following buttons are on the systems monitor control panel which is located
to the right of the instrument panel cluster:
| • | E/M (English/Metric): Use this button to
change the display between English and metric units. |
| • | TRIP RESET: This button allows you to reset
your trip odometer. To reset the trip odometer, press the TRIP RESET button. The trip
odometer will now accumulate miles (kilometers) until the next reset. |
| • | TIRE PRESS RESET: This button allows you
to reset the check tire pressure system. To reset the system or for more information,
see
Check Tire Pressure System
. |
