Removal Procedure
Important: If the fuel injectors are leaking, the engine oil may be contaminated with fuel.
- Remove the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .
- Remove the fuel injector (5) by pushing the locking tab on the fuel rail toward the center of the fuel rail.
- Remove the fuel injector upper O-ring (6).
- Remove the fuel injector lower O-ring (4).
- Discard the injector O-ring seals.
Installation Procedure
Caution: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always install the fuel injector O-rings in the proper position. If the upper and lower O-rings are different colors (black and blue), be sure to install the blue O-ring in the upper position and the black O-ring in the lower position on the fuel injector. The O-rings are the same size but are made of different materials.
Important:
• Be sure to use the correct part number when ordering replacement
fuel injectors. • The fuel injector O-rings should always be replaced whenever the
fuel injectors are serviced. Be sure to install the correct O-ring for the
fuel injector. If the O-ring is not seated properly, a vacuum leak is
possible and driveability complaints may occur.
- Lubricate the new upper (6) and lower (4) O-rings with clean engine oil.
- Install the new upper and lower injector O-rings on the fuel injector.
- Install the fuel injector on to the fuel rail.
- Install the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .
