GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Bonneville 🢒 Engine 🢒 Engine Controls - 4.6L 🢒 Air Cleaner Inlet Duct Replacement

Removal Procedure
  1. Remove the air cleaner. Refer to Air Cleaner Element Replacement
  2. Loosen the air duct clamp at the throttle body.

    3. Object Number: 104607 Size: SH
  3. Remove the air duct (1) and air resonator assembly.

Installation Procedure

    Object Number: 104607 Size: SH
  1. Install the air duct (1) and air resonator assembly and air intake duct clamp.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the air duct to the throttle body.

    3. Tighten
    Tighten the clamp assembly to 3 N·m (27 lb in).

  3. Install the air cleaner.