Tools Required

J 36346 Fascia Retainer Remover

1. Use theJ 36346 in order to remove the push pin retainers (1) at the bottom of the front license pocket cover.



2. Pull the bottom of the front license pocket cover outward .



3. Depress the tabs (1), in the fascia, at the top of the license pocket to release the license pocket cover from the fascia.
4. Pull the license pocket cover downward to remove.

1. Insert the tabs on the license pocket cover into the slots (1) in the license pocket.
2. Push the cover upward to engage the snap features.



3. Align the holes in the license pocket cover to the holes in the front bumper fascia.
4. Install the push pins (1) into the fascia.