Removal Procedure
- Insert a flat bladed tool
under the rear edge of the switch trim plate.
- Gently pry upwards to release the rear edge of the switch trim
plate from the door trim panel.
- Slide the switchplate rearwards to release the front retainer
tabs.
- Disconnect the electrical connectors.
- Remove the switch pack (2)
by releasing the retaining tabs on the switch trim plate (1).
Installation Procedure
- Snap the switch pack into
the switch trim plate.
- Install the electrical connectors.
- Install the front end of the switch plate into the door trim panel.
- Press down on the rear of the switch plate to engage the retainer
clips.