GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Bonneville 🢒 Body 🢒 Seats 🢒 Rear Seat Armrest Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Remove the rear seat back. Refer to Rear Seat Back Replacement .
  3. Place the seat back facing downward on a clean protected surface.

    4. Object Number: 700432 Size: SH
  4. Remove the fasteners (2) securing the rear seat armrest assembly (1) to the rear seat back (3).
  5. Remove the rear seat armrest assembly (1) from the rear seat back (3).

Installation Procedure

    Object Number: 700432 Size: SH
  1. Install the rear seat armrest assembly (1) into the opening in the rear seat back (3).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fasteners (2) in order to secure the rear seat armrest assembly (1) to the rear seat back (3).

    3. Tighten
    Tighten the fasteners (2) to 11 N·m (97 lb in).

  3. Install the rear seat back. Refer to Rear Seat Back Replacement .
  4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .