Schematic Reference: Power Window Schematics

Connector End View Reference: Power Door Systems Connector End Views

Did you perform the Vehicle Diagnostic System Check?

Go to Step 2

Go to in Vehicle DTC Information

Verify that the power windows lockout function is inoperative.

Does the power windows lockout function operate normally?

Go to in Wiring Systems

Go to Step 3

1. Disconnect the driver window switch.
2. Turn ON the ignition, with the engine OFF.
3. Probe the power window master switch lockout signal circuit of the driver window switch with a test lamp that is connected to a good ground.

Does the test lamp illuminate?

Go to Step 4

Go to Step 5

Repair the short to voltage in the power window master switch lockout signal circuit. Refer to in Wiring Systems.

Did you find and correct the condition?

Go to Step 7

Go to Step 5

Inspect for a poor connections at the harness connector of the driver window switch. Refer to and in Wiring Systems.

Did you find and correct the condition?

Go to Step 7

Go to Step 6

Replace the driver window switch. Refer to Front Side Door Window Switch Replacement - Left Side .

Did you complete the replacement?

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2