Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Power Window Schematics Connector End View Reference: Power Door Systems Connector End Views | |||
1 | Did you perform the Vehicle Diagnostic System Check? | Go to Step 2 | Go to in Vehicle DTC Information |
2 | Verify that the driver door power window is inoperative. Does the driver door power window operate normally? | Go to in Wiring Systems | Go to Step 3 |
3 |
Does the test lamp illuminate? | Go to Step 4 | Go to Step 5 |
4 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 6 |
5 | Test the power window motor left front up circuit for an open. Refer to and in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 8 |
6 | Test the power window motor left front down circuit for an open. Refer to and in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 8 |
7 | Inspect for poor connections at the harness connector of the driver window motor. Refer to and in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 9 |
8 | Inspect for poor connections at the harness connector of the driver window switch. Refer to and in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 10 |
9 | Replace the driver window motor. Refer to Front Side Door Window Regulator Motor Replacement . Did you complete the repair? | Go to Step 11 | -- |
10 | Replace the driver window switch. Refer to Front Side Door Window Switch Replacement - Left Side . Did you complete the repair? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
