STRUT/SHOCK ABSORBER PRODUCTION CHANGE

INTERIM STRUT/SHOCK ABSORBER PRODUCTION CHANGE

VEHICLES AFFECTED: 1988 F-CAR W/RPO FE2 -----------------

THIS BULLETIN HAS BEEN REVISED TO CLARIFY VIN BREAKPOINTS, ACKNOWLEDGE A POTENTIAL NOISE CONDITION AND PROVIDE A REVISED SERVICE PROCEDURE FOR REAR SHOCK REPLACEMENT ON VEHICLES WITHIN VIN BREAKPOINTS INDICATED.

1988 Pontiac F-cars with RPO FE2 suspension assembled between VIN breakpoints indicated below, incorporated usage of deflected disc front struts and rear shock absorbers. VIN Breakpoints --------------- JL241565 through JL254509

However, usage of these suspension components were terminated on this vehicle application for the remainder of the 1988 model year due to a potential squeak type noise condition.

To maintain ride/handling characteristics of the RPO FE2 suspension level it is recommended on vehicles identified by VIN breakpoints noted above, that when front strut or rear shock absorber replacement is required, service parts indicated below be utilized and that rear shock absorbers be replaced in pairs. Description Service P/N ----------- ----------- Front Strut 22064121 Rear Shock 22064084

This is an informational bulletin.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.