---------------------------------------------------------------------- REVISION 12/13/93 BULLETIN BEING REVISED TO ADD ADDITIONAL CORRECTION PROCEDURE SHOULD LIGHT REMAIN ON AND LABOR OPERATION FOR THIS PROCEDURE. PREVIOUS DIVISIONAL PUBLICATION NUMBERS WERE:
GM CANADA 93-10-213 PONTIAC 93-10-29 ______________________________________________________________________
SOME OWNERS OF 1993 PONTIAC FIREBIRDS MAY COMMENT THAT THE CONSOLE LIGHT DOES NOT TURN OFF WHEN THE LID IS CLOSED.
THE SWITCH PLUNGER DOES NOT MAINTAIN CONTACT WITH THE CONTACT BOSS ON THE LID ASSEMBLY.
DRILL A 9/32" (7MM) HOLE INTO THE SWITCH PLUNGER CONTACT BOSS. THE HOLE SHOULD BE CENTERED IN THE BOSS FRONT TO REAR AND APPROXIMATELY 2MM INBOARD FROM CENTER CROSSCAR (SEE ILLUSTRATION). INSTALL RETAINER P/N 10121502 COMPLETELY INTO THE HOLE. CLOSE LID AND CHECK TO BE SURE LIGHT IS OFF.
IF LIGHT STILL REMAINS ON, REPLACE DOOR LID ASSEMBLY WITH A NEW ONE, P/N 16754475.
PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.
LABOR OPERATION: T3331 (INSTALL RETAINER) LABOR TIME: 0.2 HR.
LABOR OPERATION: C2740 (DOOR LID ASSEMBLY CHANGE) USE PUBLISHED LABOR OPERATION TIME.
FIGURES: 1
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1993 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.