SEAT SPRING NOISE REPOSITION NYLON SLEEVE

SUBJECT: SEAT SPRING NOISE (REPOSITION NYLON SLEEVE) MODELS AFFECTED: 1993 FIREBIRD MODELS

CONDITION:

Seat spring noise from passenger front seat.

CAUSE:

Nylon sleeve on seat adjuster return spring positioned too far forward.

CORRECTION:

Reposition nylon sleeve on return spring.

1. Move passenger seat forward. 2. From the rear, reach under seat and disconnect return spring from front of outboard adjuster then from rear. 3. Position rear end of spring wire through second row of nylon sleeve webbing and slide sleeve forward over spring. (See Illustration.) 4. Reinstall spring to outboard adjuster.

WARRANTY INFORMATION:

Labor Operation: T3314 Labor Time: 0.2 Hr. NYLON SLEEVE

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.