GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1997 🢒 Firebird 🢒 Transmission/Transaxle 🢒 Manual Transmission - MM6 🢒 Control Lever Boot Assembly

Removal Procedure
  1. Remove the front floor console trim plate assembly. Refer to Front Floor Console Transmission Shift Opening Trim Plate in Instrument Panel, Gauges, and Console.
  2. Remove the control lever knob.
  3. Remove the floor console shift opening boot.

    4. Object Number: 33327 Size: SH
  4. Remove two bolts and the control lever handle.

    5. Object Number: 33329 Size: SH
  5. Remove the boot attaching screws and the control lever boot.

Installation Procedure

    Object Number: 33329 Size: SH
  1. Install the control lever boot and the boot attaching screws.

    2. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 33327 Size: SH
  2. Install the control lever handle and the two attaching bolts.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the floor console shift opening boot.
  4. Install the front floor console trim plate assembly. Refer to Front Floor Console Transmission Shift Opening Trim Plate in Instrument Panel, Gauges, and Console.
  5. Install the control lever knob.