GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1998 🢒 Firebird 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Windshield Wiper and Washer Switch Assembly - Assemble - Off Vehicle

Assembly Procedure
  1. Install the pivot and pulse switch assembly to the lock housing cover and sleeve assembly.

    2. Object Number: 343861 Size: SH
  2. Lubricate the switch actuator pivot pin (2) with lithium grease.
  3. Install the switch actuator pivot pin (2) into the pivot and pulse switch assembly (1).
  4. Install the switch actuator pivot pin (2) into the lock housing cover and sleeve assembly.
  5. Pull the pivot and pulse switch assembly wire harness through the steering column.

    6. Important: Use care not to damage the wires when pulling the pivot and pulse switch assembly wire harness through the steering column.

  6. Install the pivot and pulse switch assembly connector to the bulkhead connector.
  7. Install the wire protector shield.
  8. Install the lock housing cover and sleeve assembly. Refer to Lock Housing Assembly - Assemble - Off Vehicle .