GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1998 🢒 Firebird 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle

Disassembly Procedure
  1. Remove the tilt lever. Refer to Tilt Lever Replacement - On Vehicle .
  2. Remove the multifunction lever. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .
  3. Remove the hazard knob. Refer to Hazard Warning Switch Replacement .
  4. Remove the turn signal cancel cam assembly. Refer to Inflatable Restraint Steering Wheel Module Coil - Disassemble - Off Vehicle.

    5. Object Number: 354112 Size: SH
  5. Remove the round washer head screw (2) from the signal switch arm assembly (3).
  6. Pry out the signal switch arm assembly (3) from the lock housing cover and sleeve assembly.
  7. Remove the 3 pan head 6 lobed socket screws (1) from the turn signal switch assembly.

    8. Object Number: 354116 Size: SH
  8. In order to remove the turn signal switch assembly, use the following steps.
    9. 8.1. Remove the steering column wire harness strap.
    8.2. Remove the wiring protector.

    Object Number: 343824 Size: SH
  9. Disconnect the terminal connector from the turn signal switch assembly connector.
  10. Remove the terminal connector from the dimmer switch assembly.
  11. Pull the turn signal switch assembly connector through the steering column, if needed.