1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
2. Disconnect the electrical connector at the A/C refrigerant pressure sensor.



3. Remove the A/C evaporator tube bolt at the module.
4. Remove the A/C evaporator tube bolt at the condenser.
5. Remove the A/C evaporator tube from the vehicle.
6. Discard the O-rings.
7. Remove the orifice and the pressure sensor, if replacing the tube.

Lightly coat the O-rings with a mineral base 525 viscosity refrigerant oil.

1. Install the orifice and the pressure sensor, if replacing the tube.



2. Install new O-rings.
3. Install the A/C evaporator tube to the vehicle.
4. Install the A/C evaporator tube bolt at the condenser.

Tighten
Tighten the A/C evaporator tube bolt at the condenser to 16 N·m (12 lb ft).

5. Install the A/C evaporator tube bolt at the module.

Tighten
Tighten the A/C evaporator tube bolt at the module to 16 N·m (12 lb ft).




6. Connect the electrical connector at the A/C refrigerant pressure sensor.
7. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging .
8. Perform a leak test on the A/C system. Refer to Leak Testing .