GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1998 🢒 Firebird 🢒 HVAC 🢒 HVAC Systems - Manual 🢒 Blower Motor Relay Replacement

Removal Procedure
  1. Remove the driver side I/P insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Console.

    3. Object Number: 365453 Size: SH
  3. Remove the blower motor relay from the I/P tie bar.
  4. Disconnect the electrical connector from the blower motor relay.

Installation Procedure

    Object Number: 365453 Size: SH
  1. Connect the electrical connector to the blower motor relay.
  2. Install the blower motor relay to the I/P tie bar.
  3. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Console.
  4. Install the driver side I/P insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.