GM Service Manual Online
For 1990-2009 cars only

Headlamp Doors Do Not Close Or Open

Step

Action

Value(s)

Yes

No

1

Was the entire Headlight Door System Check performed?

--

Go to Step 2

Go to Headlight Doors System Check

2

  1. Disconnect the headlight opening door actuator control module connectors C1 and C2.
  2. Turn the headlamp switch to the HEAD position.
  3. Using a test light probe between the headlamp opening door actuator control module connector C1 terminals A and D.

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

3

Using a test light probe between the headlamp opening door actuator control module connector C1 terminals C and D.

Does the test light illuminate?

--

Go to Step  5

Go to Step  6

4

Using a test light probe between the headlamp opening door actuator control module connector C1 terminal A and ground.

Does the test light illuminate?

--

Go to Step  7

Go to Step 8

5

Replace the headlamp opening door actuator control module. Refer to Headlamp Door Module Replacement .

Is the replair complete?

--

Go to Step  9

--

6

Repair the poor connection or open in circuit  9.

Is the repair complete?

--

Go to Step  9

--

7

Repair the poor connection or open in circuit  150.

Is the repair complete?

--

Go to Step 9

--

8

Repair the poor connection or open in circuit  10.

Is the repair complete?

--

Go to Step 9

--

9

  1. Turn the ignition switch to the OFF position.
  2. Reconnect all connectors/components removed.

Have all the repairs been made?

--

Go to Headlight Doors System Check

--