GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the entire Exterior Lights System Check performed?

--

Go to Step  2

Go to Exterior Lights System Check

2

  1. Turn the ignition switch to the RUN.
  2. Using a test light, backprobe between C216 terminal L and ground.

Does the test light illuminate?

--

Go to Step  3

Go to Step  4

3

Replace the turn/hazard switch assembly. Refer to Hazard Warning Switch Replacement .

Is the repair complete?

--

Go to Step  9

--

4

Connect a test light between the turn signal lamp flasher terminal B and ground.

Does the test light flash off and on?

--

Go to Step  5

Go to Step  6

5

Repair a poor or an open connection in circuit 16.

Is the repair complete?

--

Go to Step  9

--

6

Connect a test light between the turn signal lamp flasher terminal A and ground.

Does the test light illuminate?

--

Go to Step  7

Go to Step  8

7

Replace the turn signal lamp flasher. Refer to Turn Signal Flasher Replacement .

Is the repair complete?

--

Go to Step  9

--

8

Repair a poor or an open connection in circuit 141.

Is the repair complete?

--

Go to Step  9

--

9

  1. Turn the ignition switch to the OFF position.
  2. Reconnect all connectors/components removed.

Have all repairs been made?

--

Go to Exterior Lights System Check

--