Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
Verify the following conditions exist before beginning this diagnostic procedure:
| ||||||||||
1 |
Does the radio operate? | -- | ||||||||
2 | With a test light to the ground, backprobe the Body Control Module (BCM) connector C2 terminal F. Does the test lamp light? | -- | ||||||||
3 |
Does the test lamp light? | -- | ||||||||
4 | Connect a test lamp between the BCM connector C2 terminal F and terminal A. Does the test lamp light? | -- | ||||||||
5 |
Is the repair complete? | -- | System OK | -- | ||||||
6 | Repair the open in CKT 102, between the BCM connector C2 terminal F and C200. Is the repair complete? | -- | System OK | -- | ||||||
7 | Repair the open in circuit 650 between the BCM connector C3 terminal C1 and S217. Is the repair complete? | -- | System OK | -- | ||||||
8 | Repair the open in circuit 650 between the BCM connector C2 terminal A and S217. Is the repair complete? | -- | System OK | -- | ||||||
9 |
Does the test lamp light? | -- | ||||||||
10 | Using a test lamp connected to ground, backprobe the BCM connector C2 terminal C. Does the test lamp light? | -- | ||||||||
11 | Repair the open in circuit 75 between the BCM and the IP fuse block. Is the repair complete? | -- | System OK | -- | ||||||
12 |
Is the repair complete? | -- | System OK | -- | ||||||
13 | Repair the open in circuit 4 between the BCM connector C2 terminal D and S254. Is the repair complete? | -- | System OK | -- | ||||||
