Filler Tube Replacement V8

1. Remove the fluid level indicator.



2. Remove the transmission bolt attaching the fill tube to the transmission.
3. Remove the transmission. Refer to Transmission Replacement .



4. Remove the fill tube and seal from the transmission.

1. Insert the seal into the automatic transmission case hole.
2. Install the fill tube to the transmission.
3. Install the transmission. Refer to Transmission Replacement .



4. Install the transmission bolt attaching the fill tube to the transmission.

Tighten
Tighten the transmission bolt to 47 N·m (35 lb ft).




5. Install the fluid level indicator.
6. Check the transmission fluid. Refer to Transmission Fluid Check .

Filler Tube Replacement V6

1. Remove the transmission fluid level indicator.
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



3. Remove the fill tube nut attaching the tube to the transmission.
4. Loosen the fill tube from the transmission.
5. Place a drain pan under the transmission to catch any dripping fluid.
6. Lower the vehicle.



7. Remove the fill tube and seal from the transmission through the engine compartment.

1. Place the fill tube to the transmission through the engine compartment.
2. Raise the vehicle.
3. Install the seal and the fill tube to the transmission.



4. Install the fill tube nut attaching the tube to the transmission.

Tighten
Tighten the fill tube nut to 25 N·m (18 lb in).

5. Lower the vehicle.



6. Install the transmission fluid level indicator.