For 1990-2009 cars only
Removal Procedure
- Open door to gain access to sealing strip.
- Remove door sealing strip with heat gun or careful scraping.
- Clean area with suitable solution of isopropyl alcohol 50/50 mixture by volume with water or high flash naptha.
- Clean and dry area with dry cloth.
Important: Ensure that sealing strip removal doesn't scratch door finish.
Installation Procedure
- Install new door sealing strip (2) to door (1).
- Remove protective liner from sealing strip.
- Align bottom sealing strip to locating feature starting at rear edge of door inner panel.
- Press bottom sealing strip into place and apply pressure along entire surface.
Important: Temperature must be 95 degrees +/- 5 degrees for proper adhesion of strip to door. If necessary, use heat gun to lightly warm strip prior to installation.
Important: Position bottom sealing strip carefully. Sealing strip cannot be removed without reapplying adhesive after contact with vehicle.
