Remove sunshade by unsnapping from installed position.
Remove three retainers by rotating retainers a quarter turn using
a key or coin if removing right quarter inner rear trim finishing panels.
Begin removing quarter
inner rear trim finishing panels (1) by first lifting from front corner.
Completely remove quarter inner rear trim panels (1) by lifting
the front of the panels, gently unseating the remaining retainers (left side
removal only).
Remove speaker electrical
connections (3) from speakers (4).
Remove speaker grille if replacing panel.
Remove rear speakers from panels.
Remove and save retainers on left panel for reuse if replacing
panel.
Install three retainers to new panels if replaced.
Install rear speakers to panels if panels were removed.
Install speaker grille if removed.
Install speaker electrical
connections (3) to speakers (4).
Important: On left panel, align the three retainers with the holes in the body
and press down firmly to engage clips. Ensure that clips "click"
into place.
Install quarter inner rear trim finishing panel.
Seat the three retainers by rotating retainers a quarter turn
using a key or a coin if installing left panel.