For 1990-2009 cars only
Removal Procedure
- Remove the old molding from the rear fender.
- Mark the position of the molding with a length of masking tape.
- Wash the area with soapy water and wipe dry.
- Remove all traces of adhesive from the fender using a oil-free naptha or alcohol.
Installation Procedure
- Remove the backing paper from the emblem.
- Measure 7.5 mm (0.29 in) from the rear edge of the door to the front edge of the rear molding (3).
- Align the molding to the tape guideline and press firmly in place.
