Itching noise heard at the door window (1) to weatherstrip (1) interface.
Door glass (2) rubbing against the weatherstrip (1).
Test drive the vehicle, roll the window (2) down so it is just off the weather-strip (1).
Apply Krytox weatherstrip lubricant (GM P/N 9985767) to weatherstrip/glass interface. Use Krytox oil only, after application, let stand 30 minutes. Wipe off excess.
Rattle coming from the bottom of the door to door glass area when the window is completely up.
The window guide stabilizer is not adjusted properly.
Close door completely. Push on the bottom of the door glass to check for movement.
• | Adjust the window guide stabilizer. |
• | The stabilizers should be adjusted to 18.5 mm (0.73 in) from the inner edge of the door to the back of the stabilizer. |
• | If symptom continues, replace the window guide stabilizer. |
Buzzing sound coming from the lower door area.
• | The side door sill plate is loose and emits a buzzing sound. |
• | The clips on the sill plate are broken. |
Open door, push sill plate back and forth to check for movement.
• | Place foam tape underneath the plate in sensitive areas. |
• | Replace the sill plate. |