Removal Procedure
- Open the window panel.
- Open the rear compartment trim, as needed. Refer to Rear Compartment
Trim.
- Disconnect the electrical
connector from the switch.
- Remove/disconnect the following components from the actuator:
• | The secondary lock retainer |
• | The electrical connector |
- Remove the endgate latch. Refer to
Endgate Latch Replacement
.
- Remove the bolts.
- Remove the switch from the latch.
Installation Procedure
- Insert the switch to the
latch.
- Install the bolts.
- Install the endgate latch. Refer to
Endgate Latch Replacement
.
- Install/connect the following components to the actuator:
• | The secondary lock retainer |
• | The electrical connector |
- Connect the electrical connector to the switch.
- Install the rear compartment trim. Refer to Rear Compartment Trim.