For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
- Disconnect the intake air temperature (IAT) and mass airflow (MAF) sensors electrical connectors, if equipped with the 5.7L engine.
- Remove the air intake duct resonator, if equipped with the 5.7L engine.
- Disconnect the intake air temperature (IAT) sensor electrical connector, if equipped with the 3.8L engine.
- Remove the air intake duct resonator, if equipped with the 3.8L engine.
- Release the retaining strap latches.
- Lift the top of the air cleaner housing off.
- Remove the air filter element.
- Remove the air cleaner / radiator support bolts.
- Remove the radiator support.
Installation Procedure
- Install the radiator support.
- Install the air cleaner / radiator support bolts
- Install the air intake duct resonator, if equipped with the 3.8L engine.
- Connect the IAT sensor electrical connector, if equipped with the 3.8L engine.
- Install the air intake duct resonator, if equipped with the 5.7L engine.
- Connect the IAT and the MAF sensors electrical connectors, if equipped with the 5.7L engine.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
Tighten
Tighten the air cleaner bolts to 12 N·m (106 lb in).
