Radiator Inlet Hose Replacement 3.8L

1. Drain the cooling system. Refer to Cooling System Draining and Filling .



2. Disconnect the intake air temperature (IAT) sensor electrical connector.



3. Remove the air intake duct resonator.



4. Remove the inlet hose from the water outlet.



5. Remove the inlet hose (1) from the radiator.

1. Install the inlet hose (1) to the radiator.



2. Install the inlet hose to the water outlet.



3. Install the air intake duct resonator.



4. Connect the IAT sensor electrical connector.
5. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Replacement 5.7L

1. Drain the cooling system. Refer to Cooling System Draining and Filling .



2. Disconnect the intake air temperature sensor (IAT) sensor electrical connector.
3. Disconnect the mass airflow (MAF) sensor electrical connector.



4. Remove the air intake duct resonator.



5. Remove the inlet hose (1) from the radiator.



6. Remove the inlet hose from the power steering cooler, if equipped.



7. Remove the inlet hose from the water pump.

1. Install the inlet hose to the water pump.



2. Install the inlet hose to the power steering cooler, if equipped.



3. Install the inlet hose (1) to the radiator.



4. Install the air intake duct resonator.



5. Connect the IAT sensor electrical connector.
6. Connect the MAF sensor electrical connector.
7. Refill the cooling system. Refer to Cooling System Draining and Filling .