Ignition Coil and Ignition Coil Module Replacement 3.8L

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .



2. Disconnect the control module electrical connector bolt.
3. Remove the control module electrical connector from the module.
4. Remove the spark plug wires from the ignition control module.



5. Remove the ignition control module nuts.
6. Remove the engine lift bracket to ignition control module bolt.
7. Remove the ignition control module and coils.

1. Install the ignition control module.
2. Install the ignition control module nuts.

Tighten
Tighten the ignition control module nuts to 30 N·m (22 lb ft).

3. Install the engine lift bracket to ignition control module bolt.

Tighten
Tighten the lift bracket to module bolt to 25 N·m (18 lb ft).




4. Connect the control module electrical connector.
5. Install the control module electrical connector bolt.

Tighten
Tighten the ignition control module bolt to 2.5 N·m (22 lb in).

6. Install the spark plug wires to the control module.



7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .