GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1999 🢒 Firebird 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Specifications.
  2. Remove the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement .

    3. Object Number: 181093 Size: MH
  3. Remove the stabilizer shaft (7).
  4. Remove the insulators (6).
  5. Remove the bolts (2).
  6. Remove the brackets (3).

Installation Procedure

    Object Number: 181093 Size: MH

    Important: The slit of the insulator must face the front of the vehicle.

  1. Place the insulators (6) over the stabilizer shaft (7).
  2. Position the clamps (5) over the insulators at the stabilizer shaft (7).
  3. Install the bolts (4).

    4. Tighten
    Tighten the bolts to 55 N·m (41 lb ft).

  4. Install the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement .
  5. Lower the vehicle.