Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Turn the headlamps on.
- Place the multi-function lever in the high beam position.
- Observe the headlamps.
Do the high beam headlamps operate?
| --
|
Go to Step 2
| Go to Headlights: (DRL)
|
2
|
- Remove the instrument cluster.
- Connect a test lamp from the instrument cluster connector terminal
A17 to ground.
- Turn the headlamps on.
- Place the multi-function lever in the high beam position.
Does the test lamp light?
| --
|
Go to Step
3
|
Go to Step 4
|
3
|
- Check for a poor connection at the instrument cluster connector
terminal A17.
- If the connection is OK, replace the instrument cluster. Refer
to
Instrument Cluster Replacement
.
Is the repair complete?
| --
| System OK
| --
|
4
| Repair the open in circuit 11.
Is the repair complete?
| --
| System OK
| --
|
