GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 33330  Size: SH
  1. Remove the control lever boot. Refer to Transmission Control Lever Boot Replacement .
  2. Remove the transmission control bolts.

  3. Object Number: 33331  Size: SH
  4. Clean the old sealant from the extension housing and the transmission control sealing surface.

Installation Procedure


    Object Number: 38411  Size: SH
  1. Apply a continuous 3 mm (0.125 in) bead of RTV sealant on the extension housing-to-control sealing surface. Use GM P/N 12345739 or equivalent.

  2. Object Number: 33330  Size: SH
  3. Install the transmission control bolts.
  4. Tighten
    Tighten the transmission control lever bolts to 17 N·m (13 lb ft).

  5. Install the control lever boot. Refer to Transmission Control Lever Boot Replacement .