GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 474579  Size: SH
  1. Remove the transmission support. Refer to Transmission Support and Mount Assembly Replacement .
  2. Remove the propeller shaft. Refer to One-Piece Propeller Shaft Replacement in Propeller Shaft.
  3. Remove the torque arm. Refer to Torque Arm Replacement in Rear Suspension.
  4. Lower the tail shaft of the transmission enough to access the transmission bolt (2).
  5. Remove the transmission bolt (2).
  6. Remove the vent tube (3) from the vent pipe.

Installation Procedure


    Object Number: 474579  Size: SH
  1. Install the vent tube (3) to the vent pipe.
  2. Install the transmission bolt (2).
  3. Tighten
    Tighten the transmission bolt (2) to 50 N·m (37 lb ft).

  4. Raise the tail shaft of the transmission.
  5. Install the torque arm. Refer to Torque Arm Replacement in Rear Suspension.
  6. Install the propeller shaft. Refer to One-Piece Propeller Shaft Replacement in Propeller Shaft.
  7. Install the transmission support. Refer to Transmission Support and Mount Assembly Replacement .