Removal Procedure
- Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Remove the bolt/screw (3) that attaches the belt (1) to the floor panel (2).
- Remove the belt (1).
Caution: The seat belt assembly and/or bracket assembly must be replaced as a unit only. Do not substitute parts for any reason, or personal injury could result.
Installation Procedure
- Install the belt (1).
- Install the bolt/screw (3).
- Install the rear seat cushion. Refer to Front Seat Replacement - Bucket in Body and Accessories.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolt/screw (3) to 42 N·m (31 lb ft).
