GM Service Manual Online
For 1990-2009 cars only

    Object Number: 310933  Size: SH
  1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
  2. Turn the ignition switch to the OFF position.
  3. Remove the key from the ignition switch.
  4. Remove the IP fuse block access door.
  5. Important: With the AIR BAG Fuse removed and the ignition switch in the RUN position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.

  6. Remove the AIR BAG Fuse from the IP fuse block.

  7. Object Number: 220928  Size: SH
  8. Remove the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
  9. Remove the connector position assurance (CPA) from the driver yellow 2-way connector (C218) located at the base of the steering column.

  10. Object Number: 220929  Size: SH
  11. Disconnect the driver yellow 2-way connector located at the base of the steering column.

  12. Object Number: 220930  Size: SH
  13. Remove the right instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
  14. Remove the connector position assurance (CPA) from the passenger yellow 2-way connector (C219) located behind the IP compartment door.

  15. Object Number: 220932  Size: SH
  16. Disconnect the passenger yellow 2-way connector located behind the IP compartment door.