GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1999 🢒 Firebird 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Headlamp Bezel Replacement

Removal Procedure

    Object Number: 341078 Size: SH
  1. Turn the ignition key to the RUN position (4).
  2. Turn the headlamps ON, then turn the switch back to park lamps.

    3. This will leave the headlamps in the UP position with the lamps OFF.

  3. Turn the ignition key to the OFF position (1).

    4. Object Number: 402675 Size: SH
  4. Open the hood.
  5. Remove the headlamp bezel screws.
  6. Remove the headlamp bezel.

Installation Procedure

    Object Number: 402675 Size: SH
  1. Install the headlamp bezel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the headlamp bezel screws.

    3. Tighten
    Tighten the headlamp bezel screws to 2 N·m (18 lb in).

  3. Close the hood.
  4. Turn the headlamp switch OFF.