GM Service Manual Online
For 1990-2009 cars only

Headlamps Inoperative - Low Beams Chevrolet and Scandanavia

Step

Action

Value(s)

Yes

No

1

Was the entire DRL system check performed?

--

Go to Step 2

Go to Headlight System Check

2

  1. Ensure that the headlamps are on.
  2. Turn the headlamp dimmer switch to the low beam position.
  3. Connect a test light from the headlamp dimmer switch connector terminal B to ground.

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

3

Connect a test light at the headlamp dimmer switch connector terminal C and ground.

Does the test light illuminate?

--

Go to Step 5

Go to Step 6

4

Connect a test light between the headlamp switch connector terminal E and ground.

Does the test light illuminate?

--

Go to Step 8

Go to Step 9

5

Repair a poor connection or open in circuit 12.

Is the repair complete?

--

Go to Step 7

--

6

Replace the headlamp dimmer switch.

Is the repair complete?

--

Go to Step 7

--

7

  1. Turn the ignition switch to the OFF position.
  2. Reconnect all connectors/components removed.

Have all repairs been made?

--

Go to Headlight System Check

--

8

Repair a poor connection or open in circuit 10.

Is the repair complete?

--

Go to Step 7

--

9

Connect a test light between the headlamp switch connector terminal J and ground.

Does the test light illuminate?

--

Go to Step 10

Go to Step 11

10

Replace the headlamp switch. Refer to Headlamp Switch Replacement

Is the repair complete?

--

Go to Step 7

--

11

Repair a poor connection or open in circuit 702.

Is the repair complete?

--

Go to Step 7

--

Headlamps Inoperative - Low Beams Pontiac

Step

Action

Value(s)

Yes

No

1

Was the entire DRL system check performed?

--

Go to Step 2

Go to Headlight System Check

2

  1. Turn the headlamps on.
  2. Turn the headlamp dimmer switch to the low beam position.
  3. Backprobe with a test light from the headlamp switch connector terminal E and ground.

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

3

Repair the poor connection or open in circuit 10.

Is the repair complete?

--

Go to Step 5

--

4

Connect a test light between the headlamp switch connector terminal J and ground.

Does the test light illuminate?

--

Go to Step 6

Go to Step 7

5

  1. Turn the ignition switch to the OFF position.
  2. Reconnect all connectors/components removed.

Have all repairs been made?

--

Go to Headlight System Check

--

6

Replace the headlamp switch. Refer to Headlamp Switch Replacement

Is the repair complete?

--

Go to Step 5

--

7

Repair a poor connection or open in circuit 702.

Is the repair complete?

--

Go to Step 5

--

Headlamps Inoperative - Low Beams Europe and Japan w/o DRL

Step

Action

Value(s)

Yes

No

1

Was the entire headlight system check performed?

--

Go to Step 2

Go to Headlight System Check

2

  1. Turn the headlamps on.
  2. Turn the headlamp dimmer switch to the low beam position.
  3. Using a test light, probe between the headlamp switch harness connector terminal E and ground.

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

3

Using a test light, backprobe between the headlamp dimmer switch connector terminal B and ground.

Does the test light illuminate?

--

Go to Step 7

Go to Step 8

4

Using a test light, probe between the headlamp switch harness connector terminal J and ground.

Does the test light illuminate?

--

Go to Step 5

Go to Step 6

5

Replace the headlamp switch. Refer to Headlamp Switch Replacement

Is the repair complete?

--

Go to Step 11

--

6

Repair a poor connection or an open in circuit 702.

Is the repair complete?

--

Go to Step 11

--

7

Using a test light, backprobe between the headlamp dimmer switch connector terminal C and ground.

Does the test light illuminate?

--

Go to Step 9

Go to Step 10

8

Repair a poor connection or an open in circuit 10.

Is the repair complete?

--

Go to Step 11

--

9

Repair a poor connection or an open in circuit 12 between the headlamp dimmer switch connector terminal C and S153.

Is the repair complete?

--

Go to Step 11

--

10

Replace the headlamp dimmer switch. Refer to Headlamp Switch Replacement

Is the repair complete?

--

Go to Step 11

--

11

  1. Turn the ignition switch to the OFF position.
  2. Reconnect all connectors/components removed.

Have all the repairs been made?

--

Go to Headlight System Check

--