Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire DRL system check performed? | -- | Go to Step 2 | |
2 |
Does the test light illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a fused jumper between terminal F and terminal D of the DRL module connector C1. Do the headlamps turn on? | -- | Go to Step 5 | Go to Step 6 |
4 | Inspect for an open in circuit 1372 between the headlamp switch and the DRL module. Does an open exist? | -- | Go to Step 7 | Go to Step 8 |
5 | Replace the DRL module. Refer to Daytime Running Lights (DRL) Control Module Replacement Is the repair complete? | -- | Go to Step 9 | -- |
6 | Repair the open in circuit 10 between the DRL module and S227. Is the repair complete? | -- | Go to Step 9 | -- |
7 | Repair the poor connection or open in circuit 1372. Is the repair complete? | -- | Go to Step 9 | -- |
8 | Replace the headlamp switch. Refer to Headlamp Switch Replacement Is the repair complete? | -- | Go to Step 9 | -- |
9 |
Have all repairs been made? | -- | -- |
