Headlamp Switch Replacement Chevrolet

1. Remove the left hand instrument panel accessory trim plate (3).
2. Remove the headlamp switch bolts (2).
3. Disconnect the headlamp switch connector (1) from the headlamp switch (4).
4. Disconnect the dimmer switch connector (5) from the headlamp switch (4).

1. Connect the dimmer switch connector (5) to the headlamp switch (4).
2. Connect the headlamp switch connector (1) to the headlamp switch (4).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the headlamp switch bolts (2).

Tighten
Tighten the headlamp switch bolts (2) to 1.9 N·m (17 lb in).

4. Install the left hand instrument panel accessory trim plate (3).

Headlamp Switch Replacement Pontiac

1. Remove the instrument panel cluster trim plate bezel.



2. Unsnap the headlamp switch (2) from the instrument panel.
3. Disconnect the headlamp switch (1) connector from the headlamp switch (2).
4. Disconnect the dimmer switch connector (3) from the headlamp switch (2).

1. Connect the dimmer switch connector (3) to the headlamp switch (2).
2. Connect the headlamp switch connector (1) to the headlamp switch (2).
3. Install the headlamp switch (2) to the instrument panel.



4. Install the instrument panel cluster trim plate bezel.