Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Control Module (BCM) | Under the right side of the IP near the blower motor | Body Control System Component Views in Body Control Systems | Body Control System Connector End Views in Body Control Systems |
Front Side Door Lock | Inside the rear of the door | Power Door Systems Component Views in Doors | -- |
Headlamp Switch | On the left side of the IP | Lighting Systems Component Views in Lighting Systems | Lighting Systems Connector End Views in Lighting Systems |
Ignition Key Warning Switch | Part of the ignition key lock cylinder | -- | -- |
Instrument Cluster | On the left side of the IP | ||
IP Fuse Block | On the left end of the IP carrier | -- | |
Seat Belt Switch | Part of the driver seat buckle assembly | Harness Routing Views in Wiring Systems | |
C200C (13 cavities) | Cross car to IP harness, between the left kick panel and the steering column | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200D (48 cavities) | Part of the IP harness, between the left kick panel and the steering column | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C216 (11 cavities) | IP to steering column harness, attached to the base of the steering column | Harness Routing Views in Wiring Systems | -- |
G200 | Near the left A-pillar, bolted to the IP mounting stud behind the kick panel | Harness Routing Views in Wiring Systems | -- |
P600 | Between the passenger door and A-pillar | Harness Routing Views in Wiring Systems | -- |
S206 | In the IP harness, at the rear compartment lid release relay breakout | -- | -- |
S216 | In the IP harness, main branch, approximately 10 cm (4 in) from the instrument cluster breakout | -- | -- |
S217 | In the IP harness, main branch, approximately 14 cm (5.5 in) from the body control module (BCM) breakout | -- | -- |
S220 | In the cross car harness, main branch, approximately 9 cm (3.5 in) from C200C breakout | -- | -- |
S226 | In the IP harness, approximately 7 cm (2.8 in) into the headlamp switch breakout | -- | -- |
