Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Turn the ignition switch to the RUN position.
- Place the multi-function lever in the left turn position.
- Observe the left front park/turn lamp.
Does the left turn signal operate?
| --
|
Go to Step
2
| Go to Exterior Lights
|
2
|
- Remove the instrument cluster.
- Connect a test lamp from the instrument cluster connector terminal
A12 to ground.
- Turn the ignition switch to the RUN position.
- Place the multi-function lever in the left turn position.
Does the test lamp blink on then off?
| --
|
Go to Step 3
|
Go to Step
4
|
3
|
- Check for a poor connection at the instrument cluster terminal
A12.
- If the connection is OK, replace the instrument cluster. Refer
to
Instrument Cluster Replacement
.
Is the repair complete?
| --
| System OK
| --
|
4
| Repair the open in circuit 1414 (USA or Gulf States) or
circuit 14 (Europe or Japan).
Is the repair complete?
| --
| System OK
| --
|
